P2 Pro’s RK3308B-S platform is relevant to compact Linux and audio devices. Its documented 256 MB or 512 MB memory options and 100 Mbps Ethernet encourage a focused application design. Choose the image and audio components around that resource budget.

ArmSoM P2 Pro
Build the smallest useful software image
List the services the device actually needs and leave out desktop components when they serve no purpose. Measure startup, idle memory and peak use while audio and networking are active. Check native package architecture and driver availability before adding application dependencies. Keep a recovery image that matches the purchased storage variant.
Budget memory before selecting speech software
Capture, resampling, buffering, networking and a recognition engine all consume resources. A small keyword detector, a network audio endpoint and a large local speech model have very different requirements. Build the smallest useful application first and measure memory under sustained input. Do not describe P2 Pro as an RK3588-style NPU platform.
Plan connectivity and optional components
P2 Pro lists 100 Mbps Ethernet, wireless networking, microSD and optional onboard eMMC. PoE requires an additional module. Check the actual ordered configuration before designing storage or power assumptions into the product. Its 40-pin connector is an audio/expansion header with a product-specific pinout, not a general Raspberry Pi HAT compatibility claim.

ArmSoM P2 Pro rear view from the existing product-media library.
Match the choice to your requirements
Requirement or situation | What to evaluate | Decision detail |
Audio capture | PDM / I2S and microphone paths | Confirm codec, clocks and channel configuration. |
Embedded services | Small Linux application footprint | Measure RAM and storage use. |
Network endpoint | Ethernet or wireless connection | Test reconnection and offline buffering. |
Example design
An audio appliance begins with a reliable sound path
A compact intercom or network-audio prototype should first demonstrate clean input and output, consistent sample rates and stable operation after restart. Add processing stages only after that baseline works. On P2 Pro, choose the documented audio route and verify the corresponding image configuration. A microphone connector alone does not establish acoustic echo cancellation, speech recognition or useful pickup distance.
Hardware and documentation
P2 Pro · RK3308B-S
RK3308B-S, 256 MB / 512 MB DDR3, 100 Mbps Ethernet, PDM and I2S audio. Board size: 65 × 52.5 mm. Storage and power accessories depend on the ordered configuration.
Hardware documentation · Product details
Frequently asked questions
Does P2 Pro run large language models like an RK3588 board?
Do not assume that. Its processor, memory class and audio-focused design require a different workload assessment.
Are eMMC and PoE always included?
No. Confirm the purchased options and required PoE module.
Product information and support
Sources
Written by ArmSoM using the documentation below. Example designs are proposals, not measured customer installations.
