ArmSoM
← All stories

Planning a Compute Module Product: Revisions, Supply and Replacement Risk

Product planning needs more than a promise that a board will remain available. Revisions, component substitutions and a usable recovery image affect whether the next batch behaves like the first. Ask for specific supply and change-management information before approving a platform.

ArmSoM CM7s

ArmSoM CM7s

Define what a replacement unit must preserve

Keep a record of the accepted board revision, memory and storage variant, image and peripheral set. Ask how changes are announced and how sample units can be qualified before a batch order. If a supplier has not stated a lifecycle date, leave it unspecified rather than turning a current listing into a long-term supply commitment.

Ask for supply terms in writing

A store listing says what can be ordered now. For a production design, ask about quantity commitments, revision notices and substitutions. Keep a few known-good units and a validation procedure for replacement parts. Any lifecycle date used in your plan should come from an agreed supplier commitment.

Optical inspection equipment at ArmSoM’s long-term manufacturing partner.

Optical inspection equipment at ArmSoM’s long-term manufacturing partner.

Match the choice to your requirements

Requirement or situation

What to evaluate

Decision detail

Revision change

Review affected interfaces

Repeat only the relevant tests plus regression checks.

Supply change

Obtain written commercial terms

Do not infer longevity from current stock.

Replacement module

Validate a named combination

Keep a rollback or redesign path.

Example design

Approve changes as controlled substitutions

Record the currently approved module, memory, storage and image before considering a replacement. Ask what changed between revisions and which tests must be repeated. A supplier’s available-stock message is not a lifecycle guarantee. For production planning, request a written supply and change-notification arrangement that fits the order. Keep a replacement part pending until electrical, mechanical and software impacts are understood.

Hardware and documentation

CM5 · RK3576

RK3576 module, 6 TOPS NPU, 55 × 40 mm and two 100-pin connectors. Module supply: 4 V recommended, 5.5 V maximum. The planned v2.0 memory option is LPDDR4/4x; current availability must be confirmed.

Hardware documentation · Product details

CM7s · RK3588S

RK3588S, 6 TOPS NPU, 55 × 40 mm and three 100-pin connectors. ArmSoM offers CM7s as an Orange Pi CM5 replacement option; confirm the exact carrier, revision and software combination.

Hardware documentation · Product details

CM1 · RK3506J

RK3506J with three Cortex-A7 cores, a Cortex-M0 and 256 MB / 512 MB DDR3L options. The 5 V module supply differs from the CM1-IO carrier’s 12 V input.

Hardware documentation · Product details

Frequently asked questions

Can two units with the same product name differ?

Yes. Revision and configuration are part of the product definition and should be recorded.

Product information and support

Explore CM5

Contact ArmSoM

Sources

Written by ArmSoM using the documentation below. Example designs are proposals, not measured customer installations.

Related reading