ArmSoM
← All stories

Forge1 or a Raspberry Pi-Class SBC for Control Applications?

Forge1 is aimed at embedded control development, with RK3506J, 512 MB DDR3L and two 100 Mbps Ethernet ports in its documented configuration. Evaluate it against a Raspberry Pi-class board by the control and network tasks required, rather than desktop performance.

ArmSoM Forge1

ArmSoM Forge1

List the control work and its timing

Separate application logic, field communication and any task with strict timing requirements. Check which work belongs in Linux and which needs another firmware or hardware path. For each interface, review the physical circuit and supported software. Controller availability by itself does not establish electrical isolation or a safety function.

Account for the surrounding electronics

The Forge1 documentation lists industrial expansion signals and dual 100 Mbps Ethernet. Confirm exactly which physical interfaces, transceivers and protection components your wiring needs. The presence of a controller signal does not mean it can be attached directly to every field bus. Include isolation, termination, grounding and enclosure connectors in the design review.

Make the operating system part of the comparison

Forge1’s documented Buildroot path suits a deliberately assembled embedded system. A project relying on a general desktop distribution may require additional packaging and maintenance work. Compare the cost of that work with the benefit of the hardware arrangement. Keep a known-good image and test how the controller returns to service after interruption.

Match the choice to your requirements

Requirement or situation

What to evaluate

Decision detail

Simple gateway or HMI

Consider Forge1

Validate the required I/O and SDK.

Existing Pi application

Consider retaining its platform

Count migration and peripheral work.

Vision or heavy graphical workload

Evaluate a higher application class

Do not select from connector count alone.

Example design

Use Forge1 to qualify the intended embedded service

For a machine gateway, begin with the actual protocol service, logging and update process rather than a desktop demonstration. Measure memory and storage growth over a prolonged run. The development platform can help expose integration problems early, but its connectors and software image still need to match the final deployment. Keep interface testing separate from claims about industrial certification.

Hardware and documentation

Forge1 · RK3506J

RK3506J development board with 512 MB DDR3L, NAND storage and dual 100 Mbps Ethernet. Check the complete interface circuit before field wiring.

Hardware documentation · Product details

Frequently asked questions

Is Forge1 faster than Raspberry Pi?

That is not a useful blanket claim. Name the Raspberry Pi model and measure the actual workload if performance is the decision criterion.

Product information and support

Explore Forge1

Contact ArmSoM

Sources

Written by ArmSoM using the documentation below. Example designs are proposals, not measured customer installations.

Related reading