ArmSoM
← All stories

ArmSoM CM5 vs Raspberry Pi Compute Module 5: Same Name, Different Platforms

ArmSoM CM5 and Raspberry Pi Compute Module 5 share a short name and a 55 × 40 mm outline, but use different processors and software. ArmSoM’s module is based on RK3576; Raspberry Pi’s uses BCM2712. A carrier design must identify which CM5 it is built for.

ArmSoM CM5

ArmSoM CM5

Raspberry Pi Compute Module 5

Raspberry Pi Compute Module 5 Photo: Raspberry Pi

Images identify the boards and are not to physical scale. Pictured configurations and included accessories may differ.

Documented platform comparison

Decision point

Raspberry Pi Compute Module 5

ArmSoM CM5

Processor

BCM2712; four Cortex-A76

RK3576; four Cortex-A72 + four Cortex-A53

Integrated general-purpose NPU

Not part of the base module specification

6 TOPS

Mechanical outline

55 × 40 mm

55 × 40 mm

Software stack

Raspberry Pi Compute Module platform

ArmSoM/Rockchip module platform

Carrier interchangeability

Requires explicit electrical and software review

Requires explicit electrical and software review

Platform references: Raspberry Pi Compute Module 5: manufacturer specifications; CM5 documentation. Board revision, purchased configuration and software support must be checked separately.

Put the manufacturer on the parts list

Write the manufacturer, module name, memory, storage and revision on every purchase order. Then compare the carrier’s actual pin assignments and power rails. Similar dimensions can help with mechanical planning, but they do not establish electrical or image compatibility. Existing Raspberry Pi carrier designs need an explicit review before an ArmSoM module is substituted.

Carrier design is the central engineering decision

Start with a carrier netlist and the published pin tables for both modules. Check power input, connector placement, signal voltages, boot access and each routed high-speed group. Some requirements may be satisfied by either platform, while a specific display arrangement or accessory can determine the choice immediately. Keep pin compatibility, mechanical compatibility and software compatibility as separate approval items.

Decide which ecosystem lowers development work

A project already built around Raspberry Pi drivers, validated peripherals and a released carrier has a reason to keep that platform. ArmSoM CM5 becomes relevant when RK3576 acceleration, the ArmSoM hardware path or customization support addresses a defined need. Evaluate the time to reach a reproducible working image rather than looking only at module price. Current memory and storage availability should come from the respective stores, not an undated comparison table.

ArmSoM CM5 evaluation carrier and module.

ArmSoM CM5 evaluation carrier and module.

Match the choice to your requirements

Requirement or situation

What to evaluate

Decision detail

Local NPU inference

Evaluate ArmSoM CM5 with RKNN

Validate model conversion and the complete input pipeline.

Raspberry Pi-specific peripherals

Evaluate Raspberry Pi CM5 first

Confirm the exact carrier and software support.

New custom carrier

Compare both released pinouts

Approve power and multiplexed interfaces before PCB work.

Keep the full module identity in purchasing records

Write the manufacturer, model, RAM, storage and revision on the order and software record. “CM5” alone is ambiguous. A procurement substitution between these modules changes the processor platform and needs its own carrier and software review.

Example design

Choosing a module for a new kiosk carrier

A kiosk with one touch display, Ethernet and local image recognition needs a carrier design and a maintained software image. Compare the two CM5 products against that exact arrangement. A board-to-board connector count is not an interface contract. List the display mode, touchscreen transport, camera part and accelerator path in the requirements. The preferred module is the one whose complete implementation the team can qualify and maintain, including recovery after a failed field update.

Hardware and documentation

CM5 · RK3576

RK3576 module, 6 TOPS NPU, 55 × 40 mm and two 100-pin connectors. Module supply: 4 V recommended, 5.5 V maximum. The planned v2.0 memory option is LPDDR4/4x; current availability must be confirmed.

Hardware documentation · Product details

Frequently asked questions

Can I order either product by saying CM5?

No. Specify ArmSoM CM5 or Raspberry Pi Compute Module 5, plus RAM, storage and revision.

Will the same carrier automatically work?

A shared outline or related connector arrangement is insufficient to claim universal compatibility.

Product information and support

Explore CM5

Contact ArmSoM

Sources

Written by ArmSoM using the documentation below. Example designs are proposals, not measured customer installations. Comparisons use published specifications, not head-to-head benchmarks.

Related reading