SBC 提供了现成的连接器原型。模块系统让团队可以围绕自己的外壳和接口设计载体。该决定取决于定制是否值得额外的电气、机械和生产工作。

ArmSoM Sige5
统计产品实际使用的接口
如果产品可以使用 SBC 的现有连接器和形状,则定制载体可能不会增加任何价值。如果需要不同的外壳、连接器放置或电源布置,则模块是有意义的。除了模块价格之外,在决策中还包括载体设计、组装、测试夹具和软件维护。
模块将责任转移给运营商
CM5 和 CM7s 允许产品设计人员选择载体布局和暴露接口。这也创造了工作:电源调节、信号完整性、连接器保护、组装、合规性和制造测试。比较整个工程方案,而不仅仅是模块成本。如果 SBC 满足机械和操作要求,它仍然是适度产量的正确生产选择。

ArmSoM CM5
根据您的要求进行选择
要求或情况 | 评估什么 | 决定详情 |
快速概念验证 | SBC | 使用现有的连接器和支持的图像。 |
自定义物理接口 | SoM 加载体 | 预算航空公司的开发和验证。 |
现场更换 | 要么,有计划 | 设计访问、备用图像和服务流程。 |
示例设计
选择解决问题的最小量的定制工作
如果设备需要标准连接器并适合现有外壳,则 SBC 可以缩短集成时间。如果连接器位置、尺寸或定制电气接口是基础,则模块和载体可能是合理的。比较完整的组件,包括稳压器、连接器、屏蔽、安装和测试。仅模块较小的轮廓并不能证明最终产品会更小或更便宜。
Compare total cost with a simple model
Compare the cost to ship and support a working product, not just board prices. For an SBC approach, include the board, adapters, enclosure changes, assembly and integration software. For a SOM approach, include the module, carrier, engineering, tooling, bring-up and test fixtures.
A useful planning equation is: total project cost equals fixed engineering and setup cost plus quantity multiplied by per-unit delivered cost. If a custom design has a higher fixed cost but a lower per-unit cost, the difference can be compared at several realistic production quantities.
Do not treat the resulting break-even point as a promise. Revision cycles, component availability, yield and support effort can change the inputs. Use supplier quotations and your own engineering estimates, then update the model after the first prototype.
Protect the transition between prototype and product
If you expect to move to a module, prototype on the same processor family where practical. Also test the peripherals that will remain in the final device. Moving from a USB camera prototype to a custom MIPI camera later introduces a separate integration task.
Keep application logic separate from board configuration. Put GPIO assignments, device paths and hardware-specific initialization in a small, documented layer. Store device-tree changes and image build settings alongside the hardware revision they describe.
Freeze the carrier only after the highest-risk interfaces have been demonstrated. A display or camera that has not yet worked is a design dependency, not a minor software detail to close after PCB manufacturing.
Additional references
硬件和文档
CM5 · RK3576
RK3576 模块、6 TOPS NPU、55 × 40 mm 和两个 100 引脚连接器。模块供应:推荐4 V,最大5.5 V。计划的v2.0内存选项是LPDDR4/4x;必须确认当前的可用性。
Sige5 · RK3576
RK3576,四个 Cortex-A72 和四个 Cortex-A53 内核,6 TOPS NPU,双千兆以太网和 M.2 PCIe 2.1 x1。
CM7s · RK3588S
RK3588S、6 TOPS、NPU、55 × 40 mm 和三个 100 引脚连接器。 ArmSoM 提供 CM7s 作为 Orange Pi CM5 的替代选项;确认确切的运营商、版本和软件组合。
Sige7s · RK3588S
RK3588S、6 TOPS NPU、千兆以太网和可拆卸 eMMC。尺寸:85 × 56 × 17 mm。更换 eMMC 之前请断开电源。
常见问题
SoM 是否总是更适合生产?
否。生产适宜性取决于需求、数量、维护和总工程成本。
产品信息和支持
来源
由 ArmSoM 使用以下文档编写。示例设计是建议,而不是测量的客户安装。
